LED power supply SLIM 13W 24V HPFU 141122
LED power supply:
- constant current,
- constant voltage.
Technical parameters:
- Power: 0 ÷ 15 W
- Current: 550 mA max.
- Supply voltage: 100 ÷ 127 V, 220 ÷ 240 V
- AC voltage: 90 ÷ 264 V
- DC voltage: 170 ÷ 280 V
- Output voltage: 24V
- Frequency: 50 - 60 Hz
- Power Factor (λ): 0.88 (0.9) C
- Efficiency: 0.90 at 230 V and 100% load
- Pst LM: ≤ 1
- SVM: ≤ 0.4
- ITHD: ≥ 40%
- Starting current: 27 A (250 µsec)
- Output ripple: ≤ 3%
- PFC: yes
- Housing: IP20, indoor use
- Dimensions: 158 x 22 x 19 mm
- Weight: 55 g / collective package of 50 pcs
- Service life: 50,000 h
- Maximum quantity for CB B16A: 27 pcs.
Security:
- against overheating and short circuits
- against mains voltage surges
- against overloads
Certificates:
- CE,
- ENEC,
- CB CERTIFICATE,
- UL + CoA,
- EAC, UKCA
16 other products in the same category:
ROUND CLOX 04T 2-2 IP68 450V Four-Way Hermetic Junction Box
Looking for an advanced and completely safe solution for branching electrical installations in harsh outdoor conditions? The ROUND CLOX 04T 2-2 four-way hermetic junction box from damik...
MiLight FUT007 Remote Control Mono/CCT Dimmer 4 Zones
The MiLight FUT007 remote control is a radio controller designed to operate all MiLight/MiBoxer receivers in the White version (for single-color LED strips).
The remote control allows you to...
PrimoLight COB LED Strip 24V 6000K CRI90 480 LED/m 7W/m 5mm IP20 5m
Professional COB LED strip with a perfectly uniform line of light
The PrimoLight COB LED strip is a modern solution for those seeking aesthetic, efficient, and reliable linear...
MPE 42/350 SLIM LED Power Supply 127515
LED power supply:
constant current
current regulation via DIP switch.
Technical parameters:
Power: 24 / 42 W
Current: 200 – 350 mA
Output voltage: 40 / 120 V
Power supply voltage: 220 / 240 V AC (198 /...
DAMIK Connector for 8mm COB LED Strips
Mono | 2-pin | DC 3–24V | 5.5A | IP20
The DAMIK strip-to-strip connector is a practical and reliable solution for connecting single-color 8mm COB LED strips without the need for soldering.
Technical...
HYTRONIK HCD418 DALI Microwave Motion Sensor
DALI HF Sensor HCD418
Presence sensor with three-stage control, designed for indoor use.
Suitable for recessed installation in:
Office/commercial lighting
Classrooms
Conference rooms
For use in...
MiBOXER FUT038S
RGB/RGBW LED Controller 12A 12-24V
Full control, pure light magic!
Looking for a reliable LED controller that will take your lighting to the next level? The MiBoxer FUT038S is a modern, intelligent RGB and RGBW LED controller that...
Damik LED Strip
1 pc = 1m
The Damik LED strip is an excellent choice for illuminating suspended ceilings, furniture, display cases, mirrors, and stairs. Its high light output and aesthetic design make it suitable for both modern and classic...
DAMIK KON25Y 3PIN IP68 Waterproof Screwless Hermetic Connector 450V
The high-quality DAMIK KON25Y hermetic connector is a reliable solution for connecting cables in areas exposed to moisture, dust, and changing weather conditions. Its IP68 rating...
DAMIK COB LED Strip 24V 10W/m 4000K
The LCE 24320 LED strip is a high-quality COB light source powered by 24V DC, featuring uniform light without visible LED dots. With a color temperature of 4000K (neutral white) and a color rendering index of...
MiBoxer FUT035Z+ 2-in-1 Dual White Controller
(Zigbee 3.0 + 2.4GHz RF) CCT / Single Color
The MiBoxer FUT035Z+ is a smart dual white / 2-in-1 LED controller that supports both single-color and adjustable color temperature (CCT) strips. The device...
Damik LED Strip
5m roll
The Damik LED strip is an excellent choice for illuminating suspended ceilings, furniture, display cases, mirrors, and stairs. Its high light output and aesthetic design make it suitable for both modern and classic...
Damik LED Strip
5m roll
The Damik LED strip is an excellent choice for illuminating suspended ceilings, furniture, display cases, mirrors, and stairs. Its high light output and aesthetic design make it suitable for both modern and classic...
MiBoxer B2 – Wall-Mounted CCT LED Remote
4-Zone 2.4GHz Touch Panel
The MiBoxer B2 is a modern, wall-mounted touch panel remote control for CCT LED lighting (warm to cool white). It supports 4 zones, operates wirelessly on the 2.4GHz RF band, and...
MiBoxer ML5 5-in-1 Matter Over WiFi LED Controller
+ 2.4GHz RF | RGB+CCT, Compatible with Matter, Tuya, and Apple Home
The MiBoxer ML5 is a modern 5-in-1 LED controller supporting the Matter Over WiFi protocol and 2.4GHz RF communication. It...
MPX 100W / 350mA 277V Slim LED Power Supply
In-wall power supply:
Multi-current power supply with DIP switch for output current selection.
Independent IP20 controller for indoor use.
Suitable for Class I and II lighting equipment.
Active power...
Viewed products
MiBoxer K3S 1-Zone 2.4 GHz RF Touch Wall Panel
The MiBoxer K3S is an elegant wall-mounted touch panel for controlling LED lighting in the MiBoxer/Mi-Light 2.4G system. It allows full control over brightness, color temperature (CCT), and turning...
error Your review appreciation cannot be sent