ECO FLAT 15W - 250/275/325/350mA
Multi-current power supply:
- with DIP switch for selecting the output current.
- Power supply for built-in use.
- It can be used for lighting equipment in protection class I and II
Data:
- Power: 15W
- Rated voltage: 220 ÷ 240 V
- Current: 250-350 mA
- Frequency: 50-60 Hz
- Operating range: 198 ÷ 264 V AC
- iTHD: ≥ 15%
- Output current ripple: ≤ 3%
- Housing: IP20 for indoor use
Security:
- against overheating and short circuits;
- against mains voltage surges;
- against overloads.
Certificates:
EN 55015, EN 61000-3-2, EN 61347-1, EN 61347-2-13, EN 61547, EN 62384
16 other products in the same category:
DAMIK Finch 360° PIR Motion Sensor 2000W Black with White Eye
Surface-mounted ceiling
The DAMIK Finch 360° motion sensor is a reliable ceiling-mounted device that automatically controls lighting or other connected devices based on detected motion...
MiBoxer C8-B – 8-Zone RGB+CCT + DIM 2.4GHz LED Remote Control (Black)
The MiBoxer C8-B is an advanced 2.4GHz RF wireless remote control that allows you to control LED lighting in up to 8 independent zones. Designed for RGB, RGBW, and RGB+CCT...
Merrytek MSA055 DALI 2.0 Microwave Motion Sensor
The MSA055 is a 5.8 GHz microwave sensor that is a modern solution for smart homes, hotels, and offices.
Accurate human motion detection
Daylight sensor detection available
DALI bus power...
TCI BTLT 149 T5 1x49W Electronic Ballast
Recessed Controller:
Suitable for lighting devices with Protection Class I and II.
Independent IP20 controller for indoor use.
Warm Start
Specifications:
Power: 49W
Nominal Voltage: 220 ÷ 240 V
Output...
DAMIK DIN150 24V LED Power Supply
6.25A 150W DIN Rail Professional Power Supply for LED Strips
This modern, robust DAMIK DIN rail-mounted LED power supply is ideal for powering LED strips, LED modules, and other devices requiring 24V DC.
Thanks...
MiBoxer PIR1-ZB PIR Motion Sensor
ZigBee 3.0 Smart Home Motion Detector
The MiBoxer PIR1-ZB is a smart motion sensor powered by ZigBee 3.0 technology, ideal for smart home automation systems. It allows you to automatically turn on lights, alarms,...
MiBoxer FUT035W+ CCT LED Controller
12–24V 2.4GHz dimming + white color adjustment, 1-zone
Key features:
Supports 12V/24V DC CCT LED strips
Smooth brightness adjustment (dimming)
Color temperature adjustment (2700K–6500K)
2.4GHz RF wireless...
DAMIK SLS 24-24 Slim LED Power Supply
24V 24W (1A), 100-240V
DAMIK's modern SLS 24-24 Slim LED power supply is an efficient and compact power source for LED strips and other 24V DC devices. Its slim and narrow design (only 1.8 cm in height and...
MPSE 40/350 SLIM LED Power Supply 127527
LED power supply:
constant current,
current regulation via DIP switch.
Technical parameters:
Power: 6 / 40 W
Current: 200 – 350 mA (constant)
Output voltage: 20 / 120 V
Power supply voltage: 220 / 240...
LED Panel Mounts 60x60x2.5cm (6 pcs)
This listing is for a set of 6 mounting brackets with the required screws. The mounting brackets included in the set are specifically designed for our 60x60x2.5cm LED PANEL BASIC or ADVANCED product, which you...
TCI LCV LED Driver 90W 24V 3.75A
Built-in driver:
Independent IP20 driver, for indoor use.
Class II protection against electric shock in the event of direct or indirect contact.
Specifications:
Power: 90 W
Nominal voltage: 220 ÷ 240 V
Output...
150W 24V DIN Rail Power Supply
Product Features:
Supply voltage: 85-264V AC or 120-370V DC
Mounts on a TS35/7.5 or 15 DIN rail
Operating temperature range: -30 to +70°C
No-load power consumption: <0.3W
Adjustable output voltage
Short circuit,...
ECO FLAT 21W - 350/400/450/500mA
Multi-current power supply:
with DIP switch for selecting the output current.
Power supply for built-in use.
It can be used for lighting equipment in protection class I and II
Data:
Power: 21W
Rated voltage:...
DAMIK Connector for 8mm COB LED Strips
Mono | 2-pin | DC 3–24V | 5.5A | IP20
The DAMIK strip-to-strip connector is a practical and reliable solution for connecting single-color 8mm COB LED strips without the need for soldering.
Technical...
MiBoxer K3S 1-Zone 2.4 GHz RF Touch Wall Panel
The MiBoxer K3S is an elegant wall-mounted touch panel for controlling LED lighting in the MiBoxer/Mi-Light 2.4G system. It allows full control over brightness, color temperature (CCT), and turning...
Damik LED Strip
5m roll
The Damik LED strip is an excellent choice for illuminating suspended ceilings, furniture, display cases, mirrors, and stairs. Its high light output and aesthetic design make it suitable for both modern and classic...
error Your review appreciation cannot be sent