With the remote control, you can remotely control functions such as:
Turning the light on/off
Dimming/brightening the lamps
Modifying sensor settings (depending on the model), including:
Motion detection range
Standby light level
Standby mode duration
Maximum light output time when the sensor detects no motion
Daylight threshold to deactivate the sensor after sunrise
Adjusting the motion sensor sensitivity (High/Low)
Furthermore, the remote control allows you to program three pre-defined settings, allowing you to instantly configure additional sensors with a single button.
The Daylight Harvesting function is easy to configure. After connecting the sensor to fixtures 1-10, simply set the light level using the DIM+|DIM- buttons and save your selection by holding the DH button for three seconds.
Specificaions:
0-10V Dimming: Yes
Standards Certificate: CE
Daylight Usage: Yes
Communication Method: IR
Ambient Humidity: IP20
Detection Range: 15m
Product Code: MH10
It should be emphasized that the remote control is dedicated to all MERRYTEK devices supporting RF configuration.
MH10
4 Items
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
S-LED 60W / 500mA DALI SLIM LED Power Supply
Built-in power supply:
Suitable for use with Class I lighting equipment.
Active power factor corrector.
Specifications:
Power: 17 - 60 W
Nominal voltage: 220 - 240V
Current: 80 - 350mA
Frequency:...
2m Flush-Mounted LED Profile for Plaster, Anodized Silver + Frosted Cover Set
Features of the Flush-Mounted Profile – PrimoLight
The PrimoLight aluminum flush-mounted profile is a specialized strip designed for wall mounting. Thanks to its wide,...
DAMIK SLS 60-12 Slim LED Power Supply
The modern DAMIK SLS 60-12 Slim LED power supply is an efficient and compact power source for LED strips and other 12V DC devices. Its slim and narrow design (only 1.8 cm in height and width) allows for...
ECO FLAT 21W - 350/400/450/500mA
Multi-current power supply:
with DIP switch for selecting the output current.
Power supply for built-in use.
It can be used for lighting equipment in protection class I and II
Data:
Power: 21W
Rated voltage:...
DAMIK Connector for 8mm COB LED Strips
The DAMIK quick-connect strip-to-strip angle connector is a practical and reliable solution for connecting 8mm single-color COB LED strips in a corner, without the need for soldering.
Technical...
DAMIK DIN30 24V LED Power Supply
1.5A 30W DIN Rail Professional Power Supply for LED Strips
This modern, robust DAMIK DIN rail-mounted LED power supply is ideal for powering LED strips, LED modules, and other devices requiring 24V DC.
Thanks to...
Merrytek MSA059D IR DALI2.0 PIR Motion Sensor
The MSA059D IR PIR Motion Sensor is a high-mount device with daylight detection and a DALI2.0 output. Thanks to Merrytek's unique algorithm, the sensor precisely detects human motion in virtually any...
MICRO MD 700 PHASE CUT LED power supply 127046
LED power supply:
constant current,
PHASE CUT dimming.
Technical parameters:
Power: 3 ÷ 10 W
Current: 700 mA
Rated supply voltage: 220 ÷ 240 V
AC voltage: 198 ÷ 264 V
Voltage Vout: 3 - 14V
Power...
MPX 100W / 350mA 277V Slim LED Power Supply
In-wall power supply:
Multi-current power supply with DIP switch for output current selection.
Independent IP20 controller for indoor use.
Suitable for Class I and II lighting equipment.
Active power...
DAMIK ROUND CLOX 6T Hermetic Six-Way Junction Box – IP68 450V
Looking for an uncompromising solution for creating a central branch point for an extensive electrical installation in challenging outdoor conditions? The ROUND CLOX 06T hermetic...
DAMIK Rubin PIR Sensor 180°/360° 1200W Black IP65
Wall-Mounted
The DAMIK Rubin motion sensor is a reliable device equipped with a sensitive PIR sensor and a modern integrated circuit that combines convenience, safety, and energy savings. It...
MiBoxer PIR1-RF Wireless PIR Motion Sensor
2.4GHz | Lighting Automation
The MiBoxer PIR1-RF is a compact, wireless motion sensor operating in the 2.4GHz band, designed to work with MiBoxer/MiLight controllers and receivers. It enables intelligent...
Damik LED Strip
5m roll
The Damik LED strip is an excellent choice for illuminating suspended ceilings, furniture, display cases, mirrors, and stairs. Its high light output and aesthetic design make it suitable for both modern and classic...
MiBoxer TR2 DIN Rail-Mounted LED Controller 2-in-1 MONO/CCT 2.4GHz RF
The MiBoxer TR2 is a functional LED controller designed for DIN rail (35mm) mounting, supporting single-color (MONO) and dual-color CCT (Dual White – CW/WW) strips.
Using...
LED power supply SLIM 11W 700mA HPFU 141114
LED power supply:
constant current.
Technical parameters:
Power: 0 ÷ 15 W
Current: 700 mA
Supply voltage: 100 ÷ 127 V, 220 ÷ 240 V
AC voltage: 90 ÷ 264 V
DC voltage: 170 ÷ 280 V
Output voltage: 2 ÷...
Damik Dove 360° Surface-Mounted PIR Sensor 2000W Black
Surface-Mounted Ceiling
The DAMIK Dove 360° motion sensor is a high-quality PIR detector designed for ceiling mounting. It automatically controls lighting or other connected devices based on...
DAMIK Round 30-24 LED Strip Power Supply, In-wall 24V 30W 1.25A, Round IP67
The professional DAMIK Round 30-24 LED strip power supply is a compact, waterproof power source for LED strips and other 24V DC devices. Its round housing, 5cm in...
DAMIK Round 45-12 LED Strip Power Supply, In-wall 12V 45W 3.75A, Round IP67
The professional DAMIK Round 45-12 LED strip power supply is a compact, waterproof power source for LED strips and other 12V DC devices. Its round housing, 5cm in...
error Your review appreciation cannot be sent